Sokkia X-1000 series Operator's Manual page 74

The measured distance data, vertical angle and
horizontal angle are displayed.
4. Sight the object, then press [REM] to start REM
measurement is started. The height from the
ground to the object is displayed in "Ht.".
Press [STOP] to stop the measurement.
• To re-observe the target, sight the target then
press
[MEAS].
• To continue REM measurement, press

• When measurement data already exists, select "REM" in <Menu> as in step 2 to proceed to step 4 and start
REM measurement. Press [STOP] to stop the measurement.
.
[REM]
70
12. DISTANCE MEASUREMENT