Powering On/Off From An External Instrument - Sokkia X-1000 series Operator's Manual


Cold boot
If the problem is not resolved with a warm boot the next step is to perform a cold boot. A cold boot will not
erase surveying data in the instrument but all the parameters will be changed to the factory settings. If the
data in the memory is necessary, BE SURE TO TRANSFER IT TO A PERSONAL COMPUTER BEFORE
PERFORMING A COLD BOOT.
To perform a cold boot, while holding {
The instrument is reset and powers ON as normal.

"19.14 Restoring Default Settings"

Problems Powering OFF
When the instrument cannot be powered OFF as normal, depress the reset button with the tip of the stylus
pen.

• Pressing the Reset button may result in file and folder data being lost.
8.3

Powering ON/OFF from an External Instrument

The instrument can be powered ON/OFF from an external device such as a computer or data collector.

• The password must be input after powering ON the instrument from an external device when a password has
been set.

Remote PWR-On function: "19.7 Instrument Conditions - Instrument"

Setting a password: "19.9 Instrument Conditions - Password"
}, and {S.P.}, press the power key on the side of the instrument.
Reset button
35
8. POWER ON/OFF