Table of Contents
Advertisement
5. Press [YES] to use the measurement results of
the first known point.
• You can also input target height here.
• Press [NO] to return to the screen in step 4 and
perform measurement again.
6. Repeat procedures 4 to 5 in the same way from
subsequent points.
When the minimum quantity of observation data
required for the calculation is present, [CALC] is
displayed.
[AUTO] will be displayed for the 3rd point
onwards. Pressing [AUTO] will rotate the
instrument to the next point and start auto
measurement.
• Press
STOP
during auto measurement to
[
]
display a confirmation message. Press
this message to return to the first point measured
using auto measurement. Measurement can now
be continued manually. Press
measurement manually from the current position.
YES
in
[
]
NO
to continue
[
]
78
14. RESECTION MEASUREMENT
Advertisement
Table of Contents
