: Move target upward
: Move target downward
: Target position is correct
• Each time
Shvr
is pressed, the distance mode
[
]
changes from slope distance, horizontal distance,
height difference and slope distance (REM).
• Tap the screen title to display popup and select
"Graphic" display to show the current position on
a graph.
7. Move the target until the distance to the setting-
out point reads 0 m. When the target is moved
within the allowed range, all distance and position
arrows are displayed.
8. Press {ESC} to return to <Setting out>. Set the
next setting out point to continue setting out
measurement.
15. SETTING-OUT MEASUREMENT
89