Connection Via Rs232C Cable - Sokkia X-1000 series Operator's Manual

9.3

Connection via RS232C Cable

RS232C communication is possible, connecting instrument and a data collector with the cable.
PROCEDURE Basic cable settings
1. Power OFF the instrument and connect the
instrument and a data collector with a interface
cable.

Cables: "25. ACCESSORIES"

• Insert the interface cable to the serial/external
power source connector tightly and then turn it.
2. Select "Comms" in Config mode.
3. Select "Comms mode" in <Communication
Setup>.
4. Set "Comms mode" to "RS232C".
9. CONNECTING TO EXTERNAL DEVICES
40