Sokkia X-1000 series Operator's Manual page 15

Detaching/attaching the RC Handle (Auto Tracking model)
The carrying handle can be removed from the instrument when the prism is located at the zenith etc.

• Never touch the beam detector. The ability of the system to perform Turning may be adversely affected. If the
beam detector is dirty, carefully wipe it with the silicon cloth.
1. Press the attach/detaching button and then move
the handle to the right while sliding the attach/
detaching slider to the direction indicated in the
arrow.
2. Along with the step 1, lift it up to detach.
Detaching/attaching the Standard Handle (Auto Pointing model)
The carrying handle can be removed from the instrument when the prism is located at the zenith etc.
1. To remove it, loosen the handle rocking screws.
2. To attache the handle, position the handle as
shown, tighten the 2 handle rocking screws
securely.
Attach/detaching button
11
4. PRODUCT OUTLINE
Attach/detaching slider
Handle rocking screws