Table of Contents
Advertisement
(4) Laser-pointer/guide light icon
Selection of laser-pointer/guide light status.
Switching the laser-pointer/guide light ON/OFF: "5.1 Basic Key Operation"
You can jump to the Instrument config. screen.
"19.7 Instrument Conditions - Instrument"
• The laser-pointer will be automatically switched OFF during distance measurement.
(5) Tilt angle compensation icon
The vertical and horizontal angles are automatically compensated for small tilt errors using the dual-axis tilt
sensor.
Selection of tilt function condition.
You can display <Tilt> or jump to the Angle/tilt config. screen.
<Tilt>: "7.2 Levelling"
Setting of tilt angle compensation: "19.1 Observation Conditions - Angle/Tilt"
•
is displayed when the instrument is out of level.
(6) Communication status with external devices icon
Selection of communication method with external devices.
You can jump to the Communication config. screen.
Setting of RS232C communication: "9.3 Connection via RS232C Cable"
Setting of Bluetooth communication: "9.1 Wireless Communication using Bluetooth Technology"
Connection status to external devices is displayed as follows.
i) Connection via Bluetooth wireless technology
: Connecting
: Canceling connection
: (Antenna is moving) Inquiring about other Bluetooth devices
: (Antenna is stationary) Communication settings in progress/Preparing for communication
(Instrument just powered ON etc.)
: Connection error (icon flashes)
: Guide light ON
: Guide light OFF
: Laser-pointer ON
: Laser-pointer OFF
: Horizontal and vertical tilt angles compensated (blue)
: No compensation
: Only vertical tilt angle compensated (green)
: Connection via RS232C cable
: Connection via Bluetooth wireless technology
25
5. BASIC OPERATION
Advertisement
Table of Contents
