Table of Contents
Advertisement
PROCEDURE Displaying Bluetooth information for the iX
1. Press [Info] in <Bluetooth>" to display information
for the iX.
"9.1 Wireless Communication using Bluetooth
Technology PROCEDURE Setting for
Bluetooth communication"
Register the Bluetooth address (BD ADDR)
displayed here in the paired device set as
"Master".
2. Press {Enter} to return to <Bluetooth>.
Bluetooth device address
This is a number unique to one particular Bluetooth device used to identify devices during communication.
This number consists of 12 characters (numbers 0 to 9 and letters from A to F).
Some devices may be referred to by their Bluetooth device address.
9.2
Communication between the iX and Companion Device
• Bluetooth communication causes instrument battery power to be depleted at a rate higher than that for normal
operation.
• Check that the companion device (data collector, computer, or cellular phone etc.) is turned on and the
relevant Bluetooth settings are complete.
• All communication settings will be changed to factory settings when a cold boot is performed. Comms setup
will need to be performed again.
"9.1 Wireless Communication using Bluetooth Technology"
PROCEDURE
1. Complete the necessary iX settings for Bluetooth
communication.
"9.1 Wireless Communication using Bluetooth
Technology PROCEDURE Setting for
Bluetooth communication"
2. Start communication by the data collector.
Manual of the program mounted on the data
collector
When a connection has been successfully
established,
is displayed.
3. Terminate the connection by the data collector.
9. CONNECTING TO EXTERNAL DEVICES
39
Advertisement
Table of Contents
