OCONdition
OCONdition
Command Syntax:
Example:
Query Syntax:
Format:
Example:
The OCONdition command specifies where the 0 marker is placed. The
0 marker can be placed on the entry or exit point of the OPATtem when
in the PATTern marker mode.
The OCONdition query returns the current setting.
OUTPUT XXX; ":MACHINE1:TWAVEFORM:OCONDITION
1 0 D I M Oc$ [loo]
20 OUTPUT XXX;" :MACHINE1:TWAVEFORM:OCONDITION?"
30 ENTER XXX; Oc$
40
PRINT Oc$
50
END
command/query
ENTERING"
HP 16528/1653B
Programming Reference