Configuring Metadata; Creating A New Metadata Section - AMX Vision 2 Operation/Reference Manual

The bitrates specified above are for playback on a PC unless otherwise stated.

Configuring Metadata

When you select Configure Metadata from the Archive Service Menu the following page appears (FIG. 81).
FIG. 81
Metadata Configuration
The Archive supports two styles of metadata:


The built-in metadata is used to display the available formats of specific videos and technical information
about the videos.
Metadata is stored in different sections which appear as tabs when browsing the archive as an administrator.
User-created metadata sections can be of one of two types:



Creating a New Metadata Section

To create a new text section, click Add new Text section. The following options appear:
Add New Text Section Options
Section Name
Displayed Name
Visible to users
2
Vision Operation/Reference Guide
Built-in: This information is only available in the Vision
Normal: This information is available in both management and user interfaces
Text Section: Sequential text
Table Section: A table with user defined number of columns
This is the name of the section as it appears on the left side of the page and
also when editing metadata in the archive (see the Editing Metadata section on
page 92). It can be different to the Displayed Name so that related sections
appear together in the lists. For example:
• Music Video: Info
• Music Video: Credits
• Music Video: Lyrics
• TV Program: Credits
• TV Program: Synopsis
This is the name of the section as it will be displayed to a user
Check this box if you want the section to be visible to the users. If it is not
checked then it will only be visible in the management interface.
Archive Service
2
Service Manager
87