Accessing Servers; Overview; Starting And Accessing Vision2 - AMX Vision 2 Operation/Reference Manual

Accessing Servers

Overview

2
Vision enables you to easily add and manage additional servers in the system. All Vision
managed by the Vision
Starting and Accessing Vision
Perform these steps to access your server remotely:
1.
Power on the Vision
2.
Test that you can access the server via the LAN. You can run this test by accessing a Command Prompt
using the Ping command. For example:
ping v2AMX-<SVCTAG>
where
responds, continue to step 3.
3.
Using a web browser on a PC with network access, navigate to http://<servername>/admin.aspx. The
Master Services page appears (FIG. 46).
FIG. 46 Master Services page
2
Vision Operation/Reference Guide
2
ServicesManager web interface.
2
server. It may take a few minutes to boot.
is the service name, which you can find on the front of your server. If the server
<SVCTAG>
2
Accessing Servers
2
services are
47