Table of Contents
Advertisement
Live (MPEG) Service
Service Settings
FIG. 65
MAX Encoder Service Settings
The top section of the page deals with the settings for the service itself and consists of the following options:
Service Settings Options
Channel Name
Encoder Type
Encoder IP Address
MAX Username
MAX Password
Perform these steps to configure the MAX-CSE Encoder:
1.
Select Configure Encoder from the MAX Encoder Menu. The Live Service page opens (FIG. 64).
2.
In the Service Name text box, enter the name of the service as you want it to appear in playlists.
3.
Select the type of encoder you want to configure from the Encoder Type options menu.
4.
Enter the network IP Address of the encoder in the Encoder IP Address field. You can find the IP address
of the MAX-CSE encoder on the LED on the front of the unit.
5.
In the MAX Username text box, enter the username used to gain access to the encoder. The default
username is Admin.
6.
In the MAX Password text box, enter the password used to gain access to the encoder. The default
password is 1988.
7.
Click Apply.
If you enter an incorrect IP address the system will attempt the connection for 30
seconds and then, if unsuccessful, the following message will appear at the bottom of
the page: "The encoder is not responding and is probably offline."
Stream Settings
The bottom section of the page deals with the specific parameters defined for multicasting the video and the
actual parameters which define the encoding process. When you check the Stream Enable check box, the
system starts the encoding process and multicasts the stream.
You will receive an error if you disable a Live channel while it is being accessed by
another service.
68
The name of the service as it appears in the playlists.
Use the options menu to select the type of MPEG encoder you want to
configure.
The network IP Address of the encoder. You can find the IP address of the
MAX-CSE encoder on the LED on the front of the unit.
The user name required to manage the device. The default user name is
Admin.
The password required to manage the device. The password is 1988.
2
Vision
Operation/Reference Guide
Advertisement
Table of Contents
