Supported Third-Party Encoders - AMX Vision 2 Operation/Reference Manual

Supported Third-Party Encoders

2
Vision supports the following third party encoding units to expand upon the available stream types:



The VBrick encoder has a Join Own Multicast setting. This setting is not available on the Vision
configuration page, so you must adjust this setting prior to setting up the encoder to interface with the Vision
system.
Use the VBrick Web Interface in a web browser to enable the Join Own Multicast setting prior to controlling
the encoder via the Vision
FIG. 1 VBrick Configuration page
2
Vision Operation/Reference Guide
Visionary Solutions AVN200 - MPEG-2 (SD/Full-D1) single channel encoder appliance
Visionary Solutions AVN420 - h.264 (SD/D1 MPEG-4 Part 10/AVC) audio video encoder blade
VBrick WMV Encoder PN 9190-4200-000 Single Channel Encoder (Up to 640 x 480)
2
system (see FIG. 1).
2
Configure this setting before
2
using with Vision
Overview
2
3