Multicast Settings; Encoding Settings - AMX Vision 2 Operation/Reference Manual

Multicast Settings

FIG. 66
MAX Encoder Multicast Settings
The following options are available in the multicast section:
Multicast Settings Options
Protocol
Address
Port
TTL

Encoding Settings

FIG. 67 MAX Encoder Encoding Settings
2
Vision Operation/Reference Guide
The protocol setting is fixed at UDP multicast. UDP multicast is the only
supported protocol at this time.
This is the multicast address that will be used. This option is pre-configured
and cannot be changed.
This is the multicast port number that will be used. This option is
pre-configured and cannot be changed.
This is the multicast TTL that will be used. You can enter a value in the space
provided. This option is pre-configured and cannot be changed.
Live (MPEG) Service
69