AMX LiveMedia IS-PLAYER-200LM Installation Manual

Overview
The IS-PLAYER-200LM (FG1230-09) is a self-contained solution for Inspired Signage
software that delivers content to each display (FIG. 1). The IS-PLAYER-200LM
("Player") runs the Babel and Player applications.
FIG. 1
IS-PLAYER-200LM - Front Panel
Features
• High-definition video output at 1080p 60HZ
• 2.13 GHz Intel® Core™2 Duo processor with 2MB cache
• 1 GB RAM (2 x 512MB)
• SATA 3.0Gb/s Hard Drive 80 GB
• Performance graphics card (DirectX 9c compliant) - supports DVI video out.
• Performance video capture card - supports Composite or SVideo video input
Additional Documentation
For more detailed instructions on installing the IS-PLAYER-200LM, refer to the
IS-PLAYER-200/LM Installation/Reference Guide (available at www.amx.com).
Important Safety Markings
Note: Power supply cords shall have conductors with cross-sectional areas sufficient for the
rated current of the equipment. Conductors shall be sized based on the requirements in the
National Electrical Code, ANSI/NFPA 70, and the Canadian Electrical Code, Part I, CSA
C22.1. The length of a power supply cord shall not exceed 4.5 m.
Product Specifications
IS-PLAYER-200LM - Product Specifications
Dimensions (HWD) • 2.8" x 16.25" x 12" (7.11 cm x 41.27 cm x 30.48 cm)
• 2 RUs
Weight 13.75 lbs (6.24 kg)
Environment • Operating Temperature: 0° C to 40° C (32° F to 104° F)
• Storage Temperature: -10° C to 70° C (14° F to 158° F)
• Operating Relative Humidity: 5% - 85% non-condensing
Power • 100-240VAC, 5-3A, 50/60Hz
• Internal: 270W FLEX ATX Power Supply
AC Current Draw • Input Current: Max 5A @115Vac, 3A @230Vac
• Max output - 270 (50ºC) (+3.3V & .5V=130W)
• DC output - +3.3V
Enclosure Metal with black matte finish
OS WEPOS
Front Panel Components
Status • Green LED indicates power
• Yellow LED indicates disc activity
Rear Panel Components
Power Switch Turns power on/off.
Note: This is a "soft switch": flipping the switch while the Player is
running issues a shutdown request.
Power connector IEC connector for AC power cable (included)
• Connect only to AC power supplied according to appropriate
national requirements. Contact your AC power Provider for
National Requirements.
• Isolate IT Power System Connection.
USB Ports 6 Type-B USB Ports for connecting USB mouse and keyboard.
Note: The Player is designed to be used without a keyboard and
mouse; they are not required for normal operation.
Ethernet Port RJ-45 Ethernet port provides Gigabit Ethernet communication
between the Player and the Controller PC (which runs the Inspired
Composer application).
Connect the Ethernet port to the LAN
Audio Out Provides stereo audio output to the display, via a mini-stereo-to-
RCA cable (not included).
Note: The Audio in (blue) and Microphone (red) connectors are not
used.
DVI Video Out Provides HD resolution DVI out via DVI cable.
(1 & 2)
Note: There are 2 DVI video outputs provided, but only one is used.
Either DVI output port can be used to deliver video to the display.
IS-PLAYER-200LM
IS-PLAYER-200LM - Product Specifications (Cont.)
HD15 Video Input
Certifications
Included
Accessories
Rack Mounting the IS-PLAYER-200
The Player is designed to be installed in an equipment rack, using the supplied Rack
Mount Ears. The Player requires 2 rack-units in a standard 19" equipment rack.
IMPORTANT NOTES
• The Player requires adequate ventilation. Before rack-mounting the
Player, please read the IS-PLAYER-200/LM Rack Mounting
Installation Guide (included with the Player).
• Before installing the Player in the rack, write down the MAC address
which is indicated on a label on the rear of the unit (FIG. 3). You'll need
this information later, and once the PC is rack-mounted it may be
difficult to view the label.
1. Use the supplied mounting screws to attach the Rack Mount Ears to both sides
of the Player chassis (FIG. 2).
Use these two holes located
on the left and right sides of
the chassis for mounting the
FIG. 2
Installing the Rack Mount Ears to the Player Chassis
2. Secure the Player to the mounting rails in the rack.
Connections and Wiring
FIG. 3 describes the rear panel connectors:
Power switch
IEC Power cord connector
FIG. 3
IS-PLAYER-200LM - Rear panel
Once the Player has been installed, and all cabling connections are complete, turn it
on and wait for content to appear on the screen before continuing to the next step.
This may take several seconds.
Installation Guide
Inspired LiveMedia Player Server
HD15 Input port supports Composite and S-Video video input as
well as analog stereo audio input (via the included Audio/Video
Breakout Cable)
• FCC Class B
• cTÜVus
• CE Mark
• CB Report
• RoHS compliant
• One set Rack Mount Ears
• One power cable
• DVI to VGA adapter
• Component adapter for Graphics Card
• Audio/Video Breakout Cable
• IS-PLAYER-200/LM Rack Mounting Installation Guide
• IS-PLAYER-200LM Installation Guide (this document)
IS-PLAYER-200 chassis
Rack Mount Ear
front
Rack Mount Ears
Rack Mount Ear
MAC Address Label
USB
Audio/Video Breakout cable (included)
rear
Use the bottom two holes on
the Rack-Mount Ears to secure
to the IS-PLAYER-200 chassis
DVI Video Out 2
DVI Video Out 1
Audio Out HD15
Ethernet Video Input