Garp Settings; Gvrp Settings; Figure 30: L2 Switching > Garp > Garp Settings; Table 27: Garp Settings - Allied Telesis IS230-10GP Web User Manual

Industrial ethernet layer 2 switch
Hide thumbs Also See for IS230-10GP:
Table of Contents

Advertisement

GARP Settings

To access this page, click L2 Switching > GARP > GARP Settings.
The following table describes the items in Figure 30.
Item
Description
Join Time
Enter a value to specify the time between the transmission of GARP
PDUs registering (or re-registering) membership for a VLAN or multi-
cast group in centiseconds. Enter a number between 6 and 600. An
instance of this timer exists for each GARP participant for each port.
Leave Time
Enter a value to specify the time to wait after receiving an unregister
request for a VLAN or multicast group before deleting the associated
entry, in centiseconds. This allows time for another station to assert
registration for the same attribute in order to maintain uninterrupted
service. Enter a number between 12 and 3000. An instance of this
timer exists for each GARP participant for each port.
Leave All Time
Enter a value to specify the Leave All Time controls how frequently
Leave All PDUs are generated. A LeaveAll PDU indicates that all reg-
istrations will shortly be deregistered. Participants will need to rejoin in
order to maintain registration. The Leave All Period Timer is set to a
random value in the range of LeaveAllTime to 1.5*LeaveAllTime. The
timer is specified in centiseconds. Enter a number between 12 and
12000. An instance of this timer exists for each GARP participant for
each port.
Apply
Click Apply to save the values and update the screen.
The GARP Information settings in the ensuing table are informational
only: Join Time, Leave Time and Leave All Time.

GVRP Settings

The GVRP Settings page allows you to enable or disable the GVRP
(GARP VLAN Registration Protocol or Generic VLAN Registration
Protocol) protocol which facilitates control of virtual local area networks
(VLANs) within a larger network.
Figure 30. L2 Switching > GARP > GARP Settings
Table 27. GARP Settings
IS230-10GP Industrial layer 2 Switch Web User Guide
57

Advertisement

Table of Contents
loading

Table of Contents