Stp Port Advanced Settings; Figure 44: L2 Switching > Spanning Tree > Stp Port Advanced Settings; Table 41: Stp Port Advanced Settings - Allied Telesis IS230-10GP Web User Manual

Chapter 2: Managing Switch
Item
Forward Delay
Max Age
Tx Hold Count
Hello Time
Apply
Item
Port Select
Priority
Apply
68
Table 40. STP Bridge Settings (Continued)
Description
Enter the variable (4 to 30) to set the forward delay for STP bridge set-
tings.
Enter the variable (6 to 40) to set the Max age for STP bridge settings.
Enter the variable (1 to 10) to designate the TX hold count for STP
bridge settings.
Enter the variable (1 to 10) to designate the Hello Time for STP bridge
settings.
Click Apply to save the values and update the screen.
The STP Bridge Information settings in the ensuing table are
informational only: Priority, Forward Delay, Max Age, Tx Hold Count and
Hello Time.
The STP Bridge Status settings in the ensuing table are informational
only: Bridge Identifier, Designated Root Bridge, Root Path Cost,
Designated Bridge, Root Port and Last Topology Change.

STP Port Advanced Settings

The STP Port Advanced Settings page allows you to select the port list to
apply this setting.
To access this page, click L2 Switching > Spanning Tree > STP Port
Advanced Settings.
Figure 44. L2 Switching > Spanning Tree > STP Port Advanced Settings
The following table describes the items in Figure 44.
Table 41. STP Port Advanced Settings
Description
Select the port to designate the STP settings.
Click the drop-down menu to designate a priority.
Click Apply to save the values and update the screen.
The STP Port Status settings in the ensuing table are informational only:
Port, Identifier (Priority / Port Id), Path Cost Conf/Oper, Designated Root
Bridge, Root Path Cost, Designated Bridge, Edge Port Conf/Oper, P2P
MAC Conf/Oper, Port Role and Port State.