Dual Image; Save Configuration; User Account; Figure 121: Tools > Dual Image - Allied Telesis IS230-10GP Web User Manual

Dual Image

The Dual Image page allows you to setup an active and backup partitions
for firmware image redundancy.
To access this page, click Tools > Dual Image.
The following table describes the items in Figure 121.
Item
Active Image
Save
The Image Information 0/1 settings in the ensuing table are informational
only: Flash Partition, Image Name, Image Size and Created Time.
Save
To access this page, click Tools > Save Configuration.
Configuration
Click Save Configuration to FLASH to save the configuration changes
you have made to flash. These changes are saved across a system
reboot. All changes submitted since the previous save or system reboot
are retained by the switch.

User Account

The User Account page allows you to setup a user and the related
parameters. Use the fields in this window to change the default password.
To access this page, click Tools > User Account.
Figure 121. Tools > Dual Image
Table 117. Dual Image
Description
Click the format for the image type: Partition0 (Active) or Partition1
(backup).
Click Save to save and keep the new settings.
Figure 122. Tools > User Account
IS230-10GP Industrial layer 2 Switch Web User Guide
135