Lag Port Settings; Figure 21: L2 Switching > Link Aggregation > Lag Management; Table 18: Lag Management - Allied Telesis IS230-10GP Web User Manual

allows for the logical merging of multiple ports into a single link.
To access this page, click L2 Switching > Link Aggregation > LAG
Management.
Figure 21. L2 Switching > Link Aggregation > LAG Management
The following table describes the items in Figure 21.
Item Description
LAG Click the drop-down menu to select the designated trunk group:
Trunk 1 ~8.
Name Enter an entry to specify the LAG name.
Type Click the radio button to specify the type mode: Static or LACP.
Ports Click the drop-down menu to select designated ports: Port1-10.
Apply Click Apply to save the values and update the screen.
The LAG Management Information settings in the ensuing table are
informational only: LAG, Name, Type, Link State, Active Member, Standby
Member, Edit (click to modify the settings) and Clear (click to load default
settings).

LAG Port Settings

The LAG Port Settings page allows you to enable or disable, set LAG
status, speed and flow control functions.
In this example we will configure a LAG between the following switches:
To access this page, click L2 Switching > Link Aggregation > LAG Port
Settings.
IS230-10GP Industrial layer 2 Switch Web User Guide
Table 18. LAG Management
49