Mld Querier; Figure 38: L2 Switching > Multicast > Mld Snooping > Mld Querier; Table 34: Mld Settings; Table 35: Mld Querier - Allied Telesis IS230-10GP Web User Manual

The following table describes the items in Figure 37 on page 62.
Item
MLD Snooping State
MLD Snooping Version Select the querier version (V1 or V2) designated to the MLD
MLD Snooping Report
Suppression
Apply
The MLD Snooping Information settings in the ensuing table are
informational only: MLD Snooping State, MLD Snooping Version and MLD
Snooping V2 Report Suppression.
The MLD Snooping Table settings in the ensuing table are informational
only: Entry No., VLAN ID, MLD Snooping Operation State, Router Ports
Auto Learn, Query Robustness, Query Interval (sec.), Query Max
Response Interval (sec.), Last Member Query count, Last Member Query
Interval (sec), Immediate Leave and Edit (click to modify the settings).

MLD Querier

The MLD Querier page allows you to select and enable/disable the MLD
querier and define the version (IGMPv1 or IGMPv2) when enabled. To
access this page, click L2 Switching > Multicast > MLD Snooping >
MLD Querier.
Figure 38. L2 Switching > Multicast > MLD Snooping > MLD Querier
The following table describes the items in Figure 38.
Item Description
VLAN ID Enter the VLAN ID to configure.
Querier State Select Enable or Disable status on the selected VLAN.
n
n
Querier Version Select the querier version (IGMPV1 or IGMPV2) designated to the
MLD Querier function.
Apply Click Apply to save the values and update the screen.
Table 34. MLD Settings
Description
Select Enable or Disable to setup the MLD Snooping State.
Snooping Version.
Select Enable or Disable to designate the status of the report
suppression.
Click Apply to save the values and update the screen.
Table 35. MLD Querier
Enable: Enable IGMP Querier Election.
Disable: Disable IGMP Querier Election.
IS230-10GP Industrial layer 2 Switch Web User Guide
63