Table 81: Egress Queue - Allied Telesis IS230-10GP Web User Manual

The following table describes the items in Figure 84 on page 100.
Item Description
Port Click the drop-down menu to select the port to define the Egress
queue.
Queue Click the drop-down menu to set the queue order for the Egress set-
ting.
State Click Disabled or Enabled to set the Egress queue state.
CIR (Kbps) Enter the value in Kbps (16 to 1000000) to set the CIR rate for the
Egress queue.
Apply Click Apply to save the values and update the screen.
The FE1 Egress Per Queue Status settings in the ensuing table are
informational only: Queue Id and Egress Rate Limit (Kbps).
IS230-10GP Industrial layer 2 Switch Web User Guide
Table 81. Egress Queue
101