X-Ring Pro Groups; X-Ring Pro Groups Settings; Figure 51: L2 Switching > X-Ring Pro > X-Ring Pro Groups > X-Ring Pro Groups Settings; Table 47: X-Ring Pro Settings - Allied Telesis IS230-10GP Web User Manual

The following table describes the items in Figure 50 on page 72.
Item Description
State Select Enabled or Disabled to setup the X-Ring Pro mode.
Apply Click Apply to save the values and update the screen.
The Information settings in the ensuing table are informational only: X-
Ring Pro State.

X-Ring Pro Groups

The X-Ring Pro Groups page allows you to select the function and role for
each ring ID and its connected ports.
To access this page, click L2 Switching > X-Ring Pro > X-Ring Pro
Groups.
The X-Ring Pro Groups page has four configuration areas:

"X-Ring Pro Groups Settings"


"Chain Settings" on page 74

"Couple Settings" on page 74

"Pair Settings" on page 75

X-Ring Pro Groups Settings
Figure 51. L2 Switching > X-Ring Pro > X-Ring Pro Groups > X-Ring Pro
The following table describes the items in Figure 51.
Item Description
Ring ID Enter a number to specifies a ranging from 1 to 255 to identify a given
X-Ring Pro group.
Port 1 Click the drop-down menu to define the port designation.
Port 2 Click the drop-down menu to define the port designation.
Add Click Add to save the values and update the screen.
Table 47. X-Ring Pro Settings
Groups Settings
Table 48. X-Ring Pro Groups Settings
IS230-10GP Industrial layer 2 Switch Web User Guide
73