Lldp Port Settings; Figure 86: Management > Lldp > Lldp Port Settings > Lldp Port Configuration; Table 83: Lldp Port Configuration - Allied Telesis IS230-10GP Web User Manual

Table 82. LLDP System Settings (Continued)
Item Description
LLDP PDU Disable Click to select the LLDP PDU handling action when LLDP is globally
Action disabled. Options include: Filtered, Bridged, or Flooded.
Transmission Interval Select the interval at which frames are transmitted. The default is 30
seconds, and the valid range is 5 to 32768 seconds.
Holdtime Multiplier Select the multiplier on the transmit interval to assign to TTL.
Reinitialization Delay Select the delay length before re-initialization.
Transmit Delay Select the delay after an LLDP frame is sent.
Apply Click Apply to save the values and update the screen.
The LLDP Global Config settings in the ensuing table are informational
only: LLDP Enabled, LLDP PDU Disable Action, Transmission Interval,
Holdtime Multiplier, Reinitialization Delay and Transmit Delay.

LLDP Port Settings

The LLDP Port Settings page allows you to configure the state (enabled or
disabled) of the selected port.
To access this page, click Management > LLDP > LLDP Port Settings.
There are three regions on this page:
LLDP Port Configuration

Optional TLV Selection

VLAN Name TLV VLAN Selection

Figure 86. Management > LLDP > LLDP Port Settings > LLDP Port
The following table describes the items in Figure 86.
Item Description
Port Select Enter the port number associated with the LLDP setting.
State Click the drop-down menu to select the LLDP port state.
Apply Click Apply to save the values and update the screen.
Configuration
Table 83. LLDP Port Configuration
IS230-10GP Industrial layer 2 Switch Web User Guide
103