Mst Instance Priority Settings; Mst Instance Info; Figure 47: L2 Switching > Spanning Tree > Mst Instance Priority Settings; Table 43: Mst Instance Id Settings - Allied Telesis IS230-10GP Web User Manual

Chapter 2: Managing Switch
Item
MSTI ID
VID List
Move
Item
MSTI ID
Priority
Apply
70
The following table describes the items in Figure 46 on page 69.
Table 43. MST Instance ID Settings
Description
Enter the MST instance ID (0-15).
Enter the pre-configured VID list.
Click Move to save the values and update the screen.
The MST Instance ID Information settings in the ensuing table are
informational only: MSTI ID and VID List.

MST Instance Priority Settings

The MST Instance Priority Settings allows you to specify the MST instance
and the bridge priority in that instance.
To access this page, click L2 Switching > Spanning Tree > MST
Instance Priority Settings.
Figure 47. L2 Switching > Spanning Tree > MST Instance Priority Settings
The following table describes the items in Figure 47.
Table 44. MST Instance Priority Settings
Description
Click the drop-down menu to specify the MST instance.
Click the drop-down menu set the bridge priority in the specified MST
instance
Click Apply to save the values and update the screen.
The MST Instance Priority Information settings in the ensuing table are
informational only: MSTI ID, Priority and Action.

MST Instance Info

To access this page, click L2 Switching > Spanning Tree > MST
Instance Info. The tables in this window are informational only.
The STP Bridge Status settings in the ensuing table are informational
only: Bridge Identifier, Designated Root Bridge, Root Path Cost,
Designated Bridge, Root Port and TCNLast Topology Change.