Ddm; Figure 116: Diagnostics > Ddm Alarm; Figure 117: Diagnostics > Ddm Alarm Info; Table 112: Ddm Alarm - Allied Telesis IS230-10GP Web User Manual

Chapter 2: Managing Switch

DDM

Item
Diagnostic Alarm
Apply
Item
High Alarm
High Warning
Low Alarm
Low Warning
Apply
130
The DDM page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > DDM.
Figure 116. Diagnostics > DDM Alarm
The following table describes the items Figure 116.
Table 112. DDM Alarm
Description
Click the drop-down menu to designate the announcement method:
Disabled, SysLog, E-mail, or SNMP.
Click Apply to save the values and update the screen.
The Diagnostic Alarm Information settings in the ensuing table are
informational only: Diagnostic Alarm.
Figure 117. Diagnostics > DDM Alarm Info
The following table describes the items in Figure 117.
Table 113. DDM Alarm Info
Description
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Apply to save the values and update the screen.