Chapter 2: Managing Switch
Item
Ring ID
Role
Port 1
Port 2
Add
X-Ring Pro
72
Groups.
Figure 49. L2 Switching > X-Ring Elite > X-Ring Elite Groups
The following table describes the items in Figure 49.
Table 46. X-Ring Elite Groups
Description
Enter a number to specifies a ranging from 1 to 255 to identify a given
X-Ring Elite group.
Click the drop-down menu to select the ring role.
Click the drop-down menu to define the port designation.
Click the drop-down menu to define the port designation.
Click Add to save the values and update the screen.
The Information settings in the ensuing table are informational only: Ring
ID, Role, Port 1, Port 2 and Delete (click to delete the desired Ring ID).
The X-Ring Pro function provides an improvement over Spanning Tree
and Rapid Spanning Tree and a rapid auto recovery in the event that the
network suffers a corrupt or broken link and prevents network loops.
X-Ring Pro Settings
The X-Ring Pro Settings page allows you to configure the status (enabled
or disabled) of the function.
To access this page, click L2 Switching > X-Ring Pro > X-Ring Pro
Settings.
Figure 50. L2 Switching > X-Ring Pro > X-Ring Pro Settings