Power Over Ethernet; Poe System Settings; Figure 95: Management > Power Over Ethernet > Poe System Settings; Table 91: Poe System Settings - Allied Telesis IS230-10GP Web User Manual

Chapter 2: Managing Switch
Power Over
Ethernet
Item
Maximum Power
Available
OverLoad Discon-
nect Mode
Apply
110
Power Over Ethernet is the function supplying power to Powered Devices
(PD) through the switch in the event that AC power is not readily available.
Power over Ethernet can be used for the following areas:
Surveillance devices

I/O sensors for security requirements

Wireless access points


PoE System Settings

The PoE System Settings page allows you to configure the overload
disconnect and the maximum available wattage.
To access this page, click Management > Power Over Ethernet > PoE
System Settings.
Figure 95. Management > Power Over Ethernet > PoE System Settings
The following table describes the items in Figure 95.
Table 91. PoE System Settings
Description
Select the value in Watts to set the maximum available power.
Click the drop-down menu to designate the overload mode:
n Overload Port First:
n Port-Based Priority:
Click Apply to save the values and update the screen.
The PoE System Information settings in the ensuing table are
informational only: Firmware Version, Maximum Power Available, Actual
Power Consumption and Overload Disconnect Type.