Poe Port Settings; Figure 96: Management > Power Over Ethernet > Poe Port Settings; Table 92: Poe Port Settings - Allied Telesis IS230-10GP Web User Manual

PoE Port Settings

The PoE Port Settings page allows you to configure the port status, its
power limitations, legacy mode status, and power limit settings.
To access this page, click Management > Power Over Ethernet > PoE
Port Settings.
Figure 96. Management > Power Over Ethernet > PoE Port Settings
The following table describes the items in Figure 96.
Item Description
Port Click the drop-down menu to select a PoE port.
Enabled Select Enabled or Disabled to designate the PoE port function by
ports.
Power Limit From Select Enabled or Disabled to designate the power limit classifica-
Classification tion.
Legacy Mode Select Enabled or Disabled to designate the legacy mode option for
the port.
Priority Click the drop-down menu to configure the power supply priority: Crit-
ical, Low, Medium or High. Default is Low.
Power Limit Enter a number to set the port power current limitation to be given to
the Powered Device (PD)
Apply Click Apply to save the values and update the screen.
The PoE Information settings in the ensuing table are informational only:
Port, Enable State, Power Limit From Classification, Priority, Legacy and
Power Limit (W).
IS230-10GP Industrial layer 2 Switch Web User Guide
Table 92. PoE Port Settings
111