Table 89. SNMP User Settings (Continued)
Item
Description
Password
Enter the characters to define the password associated with the
authorization protocol.
Add
Click Add to save the values and update the screen.
The User Status settings in the ensuing table are informational only: User
Name, Access Right, Auth-Protocol, Priv-Protocol and Delete (click to
delete the desired user name).
SNMP Trap
The SNMP Trap page allows you to set the IP address of the node and the
SNMP credentials corresponding to the version that is included in the trap
message.
To access this page, click Management > SNMP > SNMP Trap.
The following table describes the items in Figure 94.
Item
Description
IP Address
Enter the IP address to designate the SNMP trap host.
Community Name
Click the drop-down menu to select a defined community name.
Version
Click the drop-down menu to designate the SNMP version credentials
(v1 or v2c).
Add
Click Add to save the values and update the screen.
The Trap Host Status settings in the ensuing table are informational only:
No., IP Address, Community Name, Version and Delete (click to delete the
desired IP address).
Figure 94. Management > SNMP > SNMP Trap
Table 90. SNMP Trap
IS230-10GP Industrial layer 2 Switch Web User Guide
109