Stp Port Settings; Figure 42: L2 Switching > Spanning Tree > Stp Port Settings; Table 38: Stp Global Settings; Table 39: Stp Port Settings - Allied Telesis IS230-10GP Web User Manual

Chapter 2: Managing Switch
Item
Enabled
BPDU Forward
PathCost Method
Force Version
Apply
Item
Port Select
66
The following table describes the items in Figure 41 on page 65.
Table 38. STP Global Settings
Description
Click the radio-button to enable or disable the STP status.
Select flooding or filtering to designate the type of BPDU packet.
Select short or long to define the method of used for path cost calcula-
tions.
Click the drop-down menu to select the operating mode for STP.
n STP-Compatible: 802.1D STP operation.
n RSTP-Operation: 802.1w operation.
n MSTP-Operation: 802.1s operation.
Click Apply to save the values and update the screen.
The STP Information settings in the ensuing table are informational only:
STP, BPDU Forward, PathCost Method and Force Version.

STP Port Settings

The STP Port Settings page allows you to configure the ports for the
setting, port's contribution, configure edge port, and set the status of the
BPDU filter.
To access this page, click L2 Switching > Spanning Tree > STP Port
Settings.
Figure 42. L2 Switching > Spanning Tree > STP Port Settings
The following table describes the items in Figure 42.
Table 39. STP Port Settings
Description
Select the port list to specify the ports that apply to this setting.