Chapter 2: Managing Switch
Management
LLDP
Item
Enabled
102
This section includes the following topics:
"LLDP"
"SNMP" on page 106
"Power Over Ethernet" on page 110
"DHCP Server" on page 112
"SMTP Client" on page 117
"RMON" on page 120
LLDP is a one-way protocol without request/response sequences.
Information is advertised by stations implementing the transmit function,
and is received and processed by stations implementing the receive
function.
LLDP System Settings
The LLDP System Settings allows you to configure the status (enabled or
disabled) for the protocol, set the interval for frame transmission, set the
hold time multiplier and the re-initialization delay.
To access this page, click Management > LLDP > LLDP System
Settings.
Figure 85. Management > LLDP > LLDP System Settings
The following table describes the items in Figure 85.
Table 82. LLDP System Settings
Description
Click Enabled or Disabled to set the Global Settings state.