Chapter 2: Managing Switch
QoS Basic Mode
Item
Trust Mode
Apply
98
Quality of Service (QoS) allows to give preferential treatment to certain
types of traffic at the expense of others. Without QoS, the switch offers
best-effort service to each packet, regardless of the packet contents or
size sending the packets without any assurance of reliability, delay
bounds, or throughput.
QoS mode supports two modes: 802.1p and DSCP.
Global Settings
The Global Settings page allows you to configure the trust mode to a port
selection.
To access this page, click QoS > QoS Basic Mode > Global Settings.
The function is only available when QoS Properties is set to Basic.
Figure 80. QoS > QoS Basic Mode > Global Settings
The following table describes the items in Figure 80.
Table 77. QoS Basic Mode Global Settings
Description
Click the drop-down menu to select the trust state of the QoS basic
mode.
Click Apply to save the values and update the screen.
The QoS Information settings in the ensuing table are informational only:
Trust Mode.
Port Settings
The Port Settings page allows you to define a trust state (enabled or
disabled) to a listed port.
To access this page, click QoS > QoS Basic Mode > Port Settings.
Figure 81. QoS > QoS Basic Mode > Port Settings