Logging Message; Figure 5: Monitoring > Logging Message; Table 1: Device Information; Table 2: Logging Message - Allied Telesis IS230-10GP Web User Manual

Item
System Name
System Location
System Contact
MAC Address
IP Address
Subnet Mask
Gateway
Loader Version
Loader Date
Firmware Version
Firmware Date
System Object ID
System Up Time

Logging Message

Item
Target
The following table describes the items in Figure 4.
Table 1. Device Information
Description
Click Switch to enter the system name: up to 128 alphanumeric char-
acters (default is Switch).
Click Default to enter the location: up to 256 alphanumeric characters
(default is Default).
Click Default to enter the contact person: up to 128 alphanumeric
characters (default is Default).
Displays the MAC address of the switch.
Displays the assigned IP address of the switch.
Displays the assigned subnet mask of the switch.
Displays the assigned gateway of the switch.
Displays the current loader version of the switch.
Displays the current loader build date of the switch.
Displays the current firmware version of the switch.
Displays the current firmware build date of the switch.
Displays the base object ID of the switch.
Displays the time since the last switch reboot.
The Logging Message Filter page allows you to enable the display of
logging message filter.
To access this page, click Monitoring > Logging Message.
Figure 5. Monitoring > Logging Message
The following table describes the items in Figure 5.
Table 2. Logging Message
Description
Click the drop-down menu to select a target to store the log mes-
sages.
n Buffered: Store log messages in RAM. All log messages are
cleared after system reboot.
n File: Store log messages in a file.
IS230-10GP Industrial layer 2 Switch Web User Guide
33