Led Indication; Figure 118: Diagnostics > Led Indication; Table 114: Ddm Alarm - Allied Telesis IS230-10GP Web User Manual

LED Indication

Item
Diagnostic Alarm
Apply
The Vendor Info settings in the ensuing table are informational only:
Refresh (click to reload the vendor information), Port, Connector, Speed,
VendorName, VendorOui, VendorPn, VendorRev, VendorSn and
DateCode.
The LED Indication page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > LED Indication
Figure 118. Diagnostics > LED Indication
The following table describes the items Figure 118.
Table 114. DDM Alarm
Description
Click the drop-down menu to designate the announcement method:
Disabled, SysLog, E-mail, or SNMP.
Click Apply to save the values and update the screen.
The LED Information settings in the ensuing table are informational only:
LED and State.
The Event Information settings in the ensuing table are informational
only: Event, State, Error Times, Delete (Click on button to reset the event
counter and LED) and Refresh (click to reload the vendor information).
IS230-10GP Industrial layer 2 Switch Web User Guide
.
131