Notes On The S-Axis Mechanical Stopper Installation - YASKAWA MOTOMAN-MPL80 II Instructions Manual

II
MPL80

5.7.2 Notes on the S-Axis Mechanical Stopper Installation

5 Basic Specifications
5.7 Alterable Operating Range
Mount the collar (drawing No. HW9405785-2) to the hexagon socket head
screws M20 (length: 40 mm) (Tensile strength: 1200N/mm
shown in Fig. 5-9 "S-Axis Mechanical Stopper", mount the S-axis
mechanical stopper to the S-head using the collar with the screws with the
tightening torque of 167 N•m (17 kgf•m).
The S-axis mechanical stopper can be mounted in every 15-degree pitch
as shown in Fig. 5-10 "S-Axis Stopper Mounting Position".
When the manipulator is equipped with the S-axis overrun limit switches,
install the pins (drawing No. HW9405032-2) and washer M6 to the same
degree positions as the hexagon socket head screws.
Fig. 5-10: S-Axis Stopper Mounting Position
A
5-10
Section A-A
A
HW1482870
170904-1CD
2
). Then, as
38 of 81