Using A Forklift; Shipping Bolts And Brackets - YASKAWA MOTOMAN-MPL80 II Instructions Manual

II
MPL80

2.1.2 Using a Forklift

2.2
2 Transport

2.2 Shipping Bolts and Brackets

When using a forklift, the manipulator should be fixed on a pallet with bolts
as shown in Fig. 2-2 "Using a Forklift". Insert claws under the pallet and lift
it. The pallet must be strong enough to support the manipulator. Transport
the manipulator slowly with due caution in order to avoid overturning or
slippage.
Fig. 2-2: Using a Forklift
Shipping bracket
Delivered with the manipulator
Shipping Bolts and Brackets
The manipulator is provided with shipping bolts and a shipping brackets.
(See Fig. 2-1 "Transporting Position".)
• The shipping bolts and bracket are painted yellow.
Before turning ON the power, make sure that the shipping
bolts and brackets are removed. The shipping bolts and
NOTE
brackets then must be stored for future use, in the event
that the manipulator must be moved again.
2-3
Forklift claw entry
HW1482870
170904-1CD
Bolt M20 (8 bolts)
Pallet
20 of 81