Error Recovery Procedures; Figure 5-1 Troubleshootingf - Overland Data DLT LibraryXpress Series Service Manual

Error Recovery Procedures

Table 5-1 gives error recovery instructions for errors reported on the front panel of the Global
Control Module.
ERP NUMBER
C
D
F
G
80
Figure 5-1 Troubleshooting Flow Chart
Table 5-1 Error Recovery Procedures
Cycle power to the drive using the AC switch on the front panel
of the module. Wait 30 seconds to power on again.
Turn off power to the module and inspect connectors and cables.
Invalid operation. Select parameters correctly and try again.
Call Technical Support.
PROCEDURE DETAIL
Chapter 5 - Troubleshooting