Front Panel Assembly; Figure 6-12 Front Panel - Overland Data DLT LibraryXpress Series Service Manual

Front Panel Assembly

It is not necessary to remove the Front Panel to gain access to any interior parts. The Front
Panel is a field replaceable unit.
Removal
Refer to Figure 6-12.
1. Remove the cover plate as described in this chapter.
2. Move the shuttle toward the back of the chassis so the area to the left of the door is
accessible.
3. Remove the Power Supply Assembly as described in this chapter. It is not necessary
to disconnect the power switch or remove the grounding ring lug.
4. Remove the Magazine Door Assembly as described in this chapter.
5. Remove the six remaining M4 lock nuts that hold the front panel to the chassis.
Guide the switch lock cable through the door opening as the front panel is removed.
Take note of the routing of the switch lock wiring harness so it can be routed the
same way on replacement.
104
Figure 6-12 Front Panel
Chapter 6 - Parts Removal and Replacement