The
is next to the line that reads 'Load/Unload.' Press the
Load/Unload submenu, which is shown in Figure 3-26.
In Figure 3-26, the
list of sources. Note that a
the
button may now be used to scroll through the list, and that the top item on the list is
displayed. As soon as you press the
•
the list scrolls down one item (only line 2 scrolls)
•
a
appears on the right of line 1 of the display. This indicates that there is one or more
items above the item displayed on line 2.
•
The
at the left of line 2 disappears. This is because the
or the default selection, and you have scrolled the default selection offscreen, and haven't
yet selected an item from the list.
Note: The contents of the lists on line 2 and line 4 will vary as follows.
Initial Screen - 'From' Line
The list on line 2 in Figure 3-26 (the 'From' line) will include every drive and every magazine
slot (including mail slots) that has a cartridge in it (you can't get a cartridge from a slot or
drive that is empty).
Initial Screen - 'To' Line
The list on line 4 of Figure 3-26 (the 'To' line) will include all of the valid destination choices,
that is, drives and slots that are empty (you can't put a cartridge into a slot or drive which
already has one in it.)
Scroll List - 'To' Line
There is another limitation on the 'To' list. If you have selected a drive on the 'From' screen,
the 'To' list can include only slots. If you have selected a slot on the 'From' screen, the 'To'
list can contain only drives.
Let us assume that you want to load the cartridge that is in Slot 4 into any available drive.
Use the
button to scroll line two to Slot 4. The display appears as shown in Figure 3-27.
Chapter 3 - Operation
From:
DLT2
To:
Slot3
Figure 3-26
Load/Unload Initial Screen
is next to line 2 of the display. Line 2 shows the top item in a scrollable
has appeared on the right of the bottom line. This indicates that
θ
button, three things happen.
button to display the first
Enter
indicates the current selection
63