Selecting Control Panel Display Modes; The Libraryxpress Menu Structure - Overland Data DLT LibraryXpress Series Service Manual

•
Taking Inventory
•
Checking Drives
•
Scanning Labels
•
Orphaned Cartridge
•
Trapped Cartridge
•
Elevator Home
The fourth line (in a Base Module) or the third and fourth lines (in a Capacity Module) is a
map of the magazine. The numbers from 17 to 26 in Figure 3-8 represent the map numbers of
the cartridge slots. In this case, we have a 10-slot magazine in the first position below the 16-
slot Global control Module. These numbers vary according to the position of the module
within the system and the size of the magazine. If no magazine is installed, line 4 says 'No
Magazine.' The boxes which are present on this line indicate that a cartridge is present in the
corresponding slot of the magazine. An underline means that there is no cartridge present in
that slot.

Selecting Control Panel Display Modes

As previously described, the POST Screens, the Initialization Screen and the Default Screen
appear without operator or host intervention. The Fault Screens appear whenever a fault
occurs. The screens which follow appear in response to operator actions.

The LibraryXpress Menu Structure

Figure 3-9 shows the structure of the LibraryXpress menus.
Chapter 3 - Operation 53