Orientation Of Parts During Assembly; Figure 2-2. Xpress Channel Car; Figure 2-3 Car Rear View Showing Belt Block - Overland Data DLT LibraryXpress Series Service Manual

Figure 2-3
The belt block comes fastened to the back of the car with two captive screws. Carefully note
the orientation of the block with respect to the car, as shown in Figure 2-3.

Orientation of Parts During Assembly

To determine the orientation of an extension section, examine the flanges on the edges of the
section, and note that they are dissimilar. Position the section so that its orientation matches
that of the elevator base.
16
Figure 2-2. XpressChannel Car
(Front View)
Car Rear View Showing Belt Block
Chapter 2 - Installation