Base Module; Figure 3-39 Security Menu; Figure 3-40 Unlock All Media; Figure 3-41 Lock All Medias - Overland Data DLT LibraryXpress Series Service Manual

5. Press the
button. The display will appear as follows.
Enter
6. When the words 'In Progress' disappear, press the
the Default Screen appears.
7. Press the
not unlock, be sure that the key lock on the Module's front panel is unlocked.
8. Insert the magazine into the module, with the cartridges protruding toward the left.
9. If you want to relock the media, repeat steps 2 through 4.
10. Press the
the
Enter
12. All media are now locked. When the words 'In Progress' disappear, press the
Escape

Base Module

The front panel of the Base Module is nearly identical to the Global Control Module. It
includes a power switch for the module, the magazine door, the Magazine Security Lock, the
Unlock/Open button with its Locked indicator. The control panel, shown in Figure 3-3, has
one more LED indicator than the Global Control Module. Figure 3-42 shows the Base Module
front panel.
Chapter 3 - Operation
Unlock All Panels
Unlock All Media
Lock All Panels
Lock All Media
Figure 3-39
button once to move the
Unlock All Media
In Progress
Figure 3-40 Unlock All Media Screen
Button on the front panel of the Module. If the module does
Unlock/Open
button three times to move the
button. The display will appear as follows.
Lock All Media
In Progress
Figure 3-41 Lock All Media Screen
button repeatedly until the Default Screen appears.
Security Menu
next to 'Unlock All Media', then press the
Escape
next to 'Lock All Media', then press
button repeatedly until
69