Displaying Firmware Revision; Displaying Error Logs; Figure 3-20 Panel Locked Screen; Figure 3-21 Code Entry Submenu - Overland Data DLT LibraryXpress Series Service Manual

When you press the
Using the button and the
button to move the cursor to the second digit and repeat the process. When you have finished,
press the
Escape
Press the button to validate your choice. If the code is correct, the Main Menu is
Enter
displayed. If the code is incorrect, an error screen appears. If you have forgotten your unlock
code, contact your technical support representative for assistance.

Displaying Firmware Revision

You may display the library robotics firmware revision at any time by pressing the
button at the Default Screen to display the Show Status Menu. It appears as one of the items
on the Library Status submenu of the Show Status Menu. It is also displayed on line 2 of the
POST Screen and the Initialization Screens.

Displaying Error Logs

To display the error history of the module, you need to use the Show History menu. Access it
as follows.
Chapter 3 - Operation
Front Panel Locked
ENTER to Unlock
ESCAPE to Exit
Figure 3-20 Panel Locked Screen
button, the screen in Figure 3-21 appears.
Enter
Unlock Code
" "
Figure 3-21 Code Entry Submenu
button, set the first digit of the unlock code. Press the
button. The screen in Figure 3-22 appears.
Unlock Code
*"XXXX"
ENTER to Validate
ESCAPE to Exit
Figure 3-22 Code Validate Submenu
Enter
Escape
61