Figure 3-17 Security Menu - Overland Data DLT LibraryXpress Series Service Manual

•
Mail Slot1
•
. . .
•
Mail Slotn
Depending on the report for each location, Line 2 may display either 'Empty,' or 'Occupied,'
or, if a magazine is absent, 'Not Installed.'
Depending on the report for each location, Line 3 may display either 'Label Valid,' or 'Label
Not Present.'
For each location reported, Line 4 will display the actual bar code on the label, up to 8
characters.
Maintenance Menu
The Maintenance Menu and the options under it that are intended for operator use are
described in Chapter 4 - Maintenance. Additional options on the Maintenance Menu that are
intended for use by service personnel are described in the Service Manual.
Configure Menu
The Configure Menu, how to use it and the options available under it are described in
Chapter 2 - Installation.
Show History Menu
The Show History Menu enables the operator to review the history of the system. An example
of the use of the Show History Menu, appears later in this chapter under the heading
'Displaying Error Logs.' You can retrieve the configuration history, the original
configuration, as well as statistics on the number of operations the library robotics and the
drives have performed.
Security Menu
The Security Menu permits the operator to lock the control panel, preventing inadvertent or
unauthorized access to the Menu Mode, which takes the system offline. Note: You can
display the Show Status Menu without unlocking the panel (and without taking the system
offline) by pressing the
When you select the Security Menu, the screen shown in Figure 3-17 appears.
This screen is scrollable. The list of Security functions available is as follows.
Chapter 3 - Operation
button at the Default Screen.
Escape
Unlock All Panels
Unlock All Media
Lock All Panels
Lock All Media
Figure 3-17 Security Menu
59