Figure 2-23 Default Screen; Figure 2-24 Main Menu; Figure 2-25 Configure Submenu; Figure 2-26 Set Scsi Submenu - Overland Data DLT LibraryXpress Series Service Manual

2. At the Default Screen, press the
Menu, as in Figure 2-24.
3. Press the
button. The display will show the Configure submenu, as shown in Figure 2-
Enter
25. Note that the
configuration options that can be reached by scrolling with the
4. To select a configuration option, press the
the on the display is next to the option you want to change. In this case, let us
choose Set SCSI. Press the
submenu in Figure 2-26 appears.
Chapter 2 - Installation
READY
Modules 123456
1
_ _ _ _ _ _ _ _
11 16
_ _ _ _
Figure 2-23 Default Screen
Enter
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Figure 2-24 Main Menu
button three times to move the
at the end of the fourth line means that there are additional
Set Data Format
Set SCSI
Set Element Base
Set Identification
Figure 2-25 Configure Submenu
button to display the choices for that option. The
Enter
Library Parity:
*Enabled
Library Bus ID:
*6
Figure 2-26 Set SCSI Submenu
__
10
button. The display will show the Main
to Configure Menu, then press the
or button on the control panel until
button.
37