Figure 3-10 Main Menu; Figure 3-11 Panel Locked Screen; Figure 3-12 Code Entry Submenu - Overland Data DLT LibraryXpress Series Service Manual

To prevent inadvertent interruption of host operations, you may lock out the Menu Mode
using the Security Menu. See the section titled 'Security Menu' later in this chapter. When all
control panels are locked, you must enter your unlock code in order to display the Main
Menu. Note that the Show Status Menu of each module remains accessible. It may be
displayed from the module's Default Screen at any time by pressing the
When the Default Screen appears on the screen, you can enter the Menu Mode by pressing the
button. The Main Menu shown in Figure 3-10 appears.
Enter
Note: If the Control Panel has been locked, the screen shown in Figure 3-11 appears instead
of Figure 3-10. You must know the unlock code for the system before you can proceed.
When you press the
Using the button and the
set it, press the
Enter
When you have finished, press the
If the code is correct, the Main Menu is displayed. If the code is incorrect, an error screen
appears.
Chapter 3 - Operation
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Figure 3-10
Front Panel Locked
ENTER to Unlock
ESCAPE to Exit
Figure 3-11 Panel Locked Screen
button, the screen in Figure 3-12 appears.
Enter
Unlock Code
"
Figure 3-12 Code Entry Submenu
Buttons, set the first digit of the unlock code. When you have
button to move the cursor to the second digit and repeat the process.
button, then the
Escape
Main Menu
button to confirm your entry.
Enter
button.
Escape
55