Figure 3-18 Code Select Submenu; Figure 3-19 Code Accept Submenu - Overland Data DLT LibraryXpress Series Service Manual

•
Unlock All Panels
•
Unlock All Media
•
Lock All Panels
•
Lock All Media
•
Master Locking
•
Module 1 Locking
. . .
•
Module n Locking
•
Set Unlock Code
To change the unlock code, or to enable or disable the panel locking function, scroll
downward by pressing the
button. The screen shown in Figure 3-18 appears.
An underline cursor appears underneath the first digit. To set the first digit, press the
button or the button until the desired number is displayed. To move the cursor to the
second digit, press the
remember the 4-digit number, as you will need it in order to enter the Menu Mode. An unlock
code of 0000 disables panel locking.
When you have finished entering four digits, press the
Figure 3-19 appears. Your code is shown in place of XXXX.
Press the button if you want to adopt the unlock code that is displayed. Press the
Enter
button if you do not want to accept it. Press the
Menu, and again to return to the Default Screen.
The next time you attempt to enter Menu Mode, the screen shown in Figure 3-20 appears.
You can still display the Status Menu without using the security code by pressing the
button at the Default Screen
60
button until the
Unlock Code
*"0000"
0000 Disables Lock
Figure 3-18 Code Select Submenu
button. Repeat the process for each of the four digits. Be sure to
Enter
Unlock Code
*"XXXX"
ENTER to Accept
ESCAPE to Exit
Figure 3-19 Code Accept Submenu
is next to 'Set Unlock Code.' Press the
button. The screen shown in
Escape
button again to return to the Main
Escape
Enter
Escape
Escape
Chapter 3 - Operation