Removing A Magazine; Figure 3-31 Magazine In Place; Figure 3-32 Main Menu; Figure 3-33 Main Menu, Scrolled - Overland Data DLT LibraryXpress Series Service Manual

Removing a Magazine

1. Press the
'Magazine Locked' appears on the control panel of that module, continue with step
2. If no such message appears, skip to step 8.
2. On the control panel of the Global Control Module, at the Default Screen, press the
button to display the Main Menu shown in Figure 3-32. Note: if the display
Enter
says that the front panel is locked, you need to know the unlock code for your
system. See the section titled 'Entering the Menu Mode' earlier in this chapter for
unlocking instructions.
3. Press the
Menu'. The display will appear as follows.
66
Figure 3-31 Magazine In Place
Button on the front panel of the module. If the message
Unlock/Open
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Figure 3-32
button five times to scroll the display and move the
Maintenance Menu
Configuration Menu
Show History Menu
Security Menu
Figure 3-33 Main Menu, Scrolled
Main Menu
next to 'Security
Chapter 3 - Operation