Chrysler Stratus RHD 1997 Interactive Electronic Service Manual page 474

JA
REMOVAL AND INSTALLATION (Continued)
(4) Rotate socket counterclockwise one quarter
turn.
(5) Pull socket from back of lamp (Fig. 4).
(6) Twist and pull bulb from socket.
Fig. 4 Turn Signal Lamp Bulb
INSTALLATION
Reverse the preceding operation.
PARK LAMP BULB
REMOVAL
(1) Release hood latch and open hood.
(2) Remove screws holding headlamp module to
radiator closure panel.
(3) Separate headlamp module from radiator clo-
sure panel.
(4) Disengage wire connector from back of head-
lamp bulb.
(5) Remove rubber seal boot (Fig. 5).
(6) Pull park lamp bulb socket from headlamp
module (Fig. 6).
(7) Pull bulb from socket.
Fig. 5 Rubber Boot Seal
Fig. 6 Park Lamp Bulb
INSTALLATION
Reverse the preceding operation.
SIDE REPEATER LAMP BULB
REMOVAL
(1) Open door to gain access to side repeater lamp
socket.
(2) Rotate side repeater lamp socket counter clock-
wise one quarter turn.
(3) Separate side repeater lamp socket from side
repeater lamp (Fig. 7).
(4) Rotate and pull bulb from socket.
Fig. 7 Side Repeater Lamp Socket
INSTALLATION
Reverse the preceding operation.
REAR FOG LAMP BULB
Removal
(1) Remove screws holding rear fog lamp to rear
bumper fascia.
LAMPS 8L - 5