Chrysler Stratus RHD 1997 Interactive Electronic Service Manual page 448

JA
REMOVAL AND INSTALLATION (Continued)
WASHER RESERVOIR
REMOVAL
(1) Disconnect washer fluid hose at in-line connec-
tor on top of the right shock tower.
(2) Partially remove bumper facia as needed to
gain access to the reservoir. Refer to Group 23, Body.
(3) Remove carbon canister.
(4) Disconnect wire connector from washer pump
and harness mounting tab (Fig. 12).
(5) Slide rearward and drop down and away from
vehicle.
(6) Drain washer fluid from reservoir into an
appropriate container.
(7) Disconnect the washer hose from the reservoir.
VIEW Y
Fig. 11 Washer Fluid Hose Location
INSTALLATION
For installation, reverse the above procedures.
VIEW Z
WINDSHIELD WIPERS AND WASHERS
Fig. 12 Reservoir Removal
WASHER PUMP RESERVOIR VIEW W
8K - 9